Handspring Treo 90 Replacement LCD with Digitizer in 4 Star condition - Pull. The Treo 90 is such a great PDA but sometimes things happen to the LCD screen. If your LCD has gotten cracked or is "bleeding" or if it has gotten yellow / orange splotches on it then here is a used & tested replacement LCD screen complete with the digitizer glasstop!
Note: If you are just going to throw away your old LCD then contact us, we may have an interest in it and if so will give you free shipping on this order and provide a prepaid mailer to send us your old LCD. See our other Handspring Treo parts and accessories!
Note: Remember that the LCD is held onto a bracket that also holds the keyboard so it will be necessary for you to remove your old LCD from the bracket and put the replacement unit on. See the installation tips below.
Installation Note: To swap the keypad out you need to remove the LCD from the bracket of your existing keypad / bracket assembly. It is held on by some double sided adhesive and can be easily removed but you have to be CAREFUL!! Some ways to help loosen up the adhesive are to heat the back of the bracket with a hairdryer, just be careful not to over heat it and damage the LCD. You can also use a thin blade or piece of plastic to work around the adhesive. The tools that we sell for working on PDAs and iPods are what we use and work great.
